Subject:Trigger MIDI from external module using Waveterminal Sound Card

Posted by: midifiles

Date:4/27/2002 6:36:11 PM

I want ACID Pro 3 to send the MIDI data from an imported MIDI File to my Roland JV1010. When I load the MIDI File into ACID Pro and play a note on my MIDI keyboard, the sounds are transmitted to the JV1010. However, when i hit the start button in ACID Pro, the JV1010 displays a MIDI communication error message and will not play back the MIDI File.

Here's my set up and would appreciate any help:

1: ACID Pro 3 version Of
2: Win98SE
3: Roland JV1010 Sound module
4: Sound card: Egosys 'Wave Terminal 2496' with Egosys Miditerminal 2120 adapter hooked to the WaveTerminal 2496 running the E-WDM drivers
they provide.

I have the devices set up correctly. Any ideas

John Ialuna
john@midi.com.au
www.midi.com.au

Subject:RE: Trigger MIDI from external module using Waveterminal Sound Card

Reply by: groovewerx

Date:4/28/2002 6:59:30 AM

i use wamirack24 by egosys...midi is routed by cubase

1. be sure the jv is setup to send/receive data
2. set the proper filters and toggle exclusive on/off
3. if you have a sequencer, use it to test the midi file
4. if those don't work, there must be a midi filter disabled in acid. go find it...

good luck