acid 4 crashes at startup -ACID Product Family - MAGIX Community Forums Archive

Subject:acid 4 crashes at startup Posted by: Kosmow Date:9/5/2002 11:52:18 AM I am running win98se on a pentium III 450mhz system with a terratec ews64xl soundcard with asio 2 drivers. Matrox videocard and dxr3 mpeg card with realmagic drivers. A diamond fireport scsi card with a few harddisks and cd players. I have tried to disable everything except the terratec but with no succes. I also removed the dll that makes the haupage tv card crash. Acid 3 worked fine. Is there anyone with the same problem and or a solution? thanks, Rene
Subject:RE: acid 4 crashes at startup Reply by: SonyNateM Date:9/5/2002 12:03:29 PM Do you have the crash details? What module does the crash point to?
Subject:RE: acid 4 crashes at startup Reply by: Kosmow Date:9/5/2002 1:02:40 PM Thanks for reply, this is the message: module KERNEL32.DLL op0187:bff7b30b. Registers: EAX=00a0001c CS=0187 EIP=bff7b30b EFLGS=00210216 EBX=00000000 SS=018f ESP=02f8fc30 EBP=02f8fc40 ECX=00000078 DS=018f ESI=00a00000 FS=10bf EDX=00a0001c ES=018f EDI=00a9f9d8 GS=0000 Bytes in CS:EIP: 89 43 04 68 00 02 00 00 51 ff 75 fc 56 e8 f4 ed Stackdump: 00000000 00a9f9f0 62800000 00a9f9d0 02f8fc80 62874eef 00a00000 00000000 00a9f9f0 00000000 00000003 02f8fc80 62800000 62a60159 62800000 00000003
Subject:RE: acid 4 crashes at startup Reply by: pwppch Date:9/5/2002 10:29:33 PM Q: Do you have a prior version of ACID? If so, does it start up ok? I would try disabling the Terratec card. ACID can run with no audio hardware available, and this would narrow it down to at least exclude the audio card as the culprit. You may have to do the following to prevent the ASIO drivers from being loaded as well. (Disabling a audio card in Windows doesnot prevent the ASIO drivers from being enumerated and loaded, so this could cause a problem as well.) You may want to first try disabling the ASIO drivers You can disable the ASIO drivers as follows: - Start Menu \| Run \| regedit - Locate the following key in your registry: HKEY_LOCAL_MACHINE\SOFTWARE\ASIO Located in here will be a list of installed ASIO drivers. Locate the entry for your Terratec card. You will find a key labled CLSID in here, it is of type REG_SZ. Rename this key to xCLSID. This will bascially disable the ASIO driver for the Terratec card. Start ACID. If ACID launches successfully, then the problem was here and we will have to determine why the Terratec ASIO drivers would becausing us a problem. If not, then we will have to look for other causes for the problem. Peter

Subject:acid 4 crashes at startup

Posted by: Kosmow

Date:9/5/2002 11:52:18 AM

I am running win98se on a pentium III 450mhz system with a terratec ews64xl soundcard with asio 2 drivers. Matrox videocard and dxr3 mpeg card with realmagic drivers. A diamond fireport scsi card with a few harddisks and cd players.
I have tried to disable everything except the terratec but with no succes.
I also removed the dll that makes the haupage tv card crash.

Acid 3 worked fine. Is there anyone with the same problem and or a solution?

thanks,
Rene

Subject:RE: acid 4 crashes at startup

Reply by: SonyNateM

Date:9/5/2002 12:03:29 PM

Do you have the crash details? What module does the crash point to?

Subject:RE: acid 4 crashes at startup

Reply by: Kosmow

Date:9/5/2002 1:02:40 PM

Thanks for reply, this is the message:
module KERNEL32.DLL op0187:bff7b30b.
Registers:
EAX=00a0001c CS=0187 EIP=bff7b30b EFLGS=00210216
EBX=00000000 SS=018f ESP=02f8fc30 EBP=02f8fc40
ECX=00000078 DS=018f ESI=00a00000 FS=10bf
EDX=00a0001c ES=018f EDI=00a9f9d8 GS=0000
Bytes in CS:EIP:
89 43 04 68 00 02 00 00 51 ff 75 fc 56 e8 f4 ed
Stackdump:
00000000 00a9f9f0 62800000 00a9f9d0 02f8fc80 62874eef 00a00000 00000000 00a9f9f0 00000000 00000003 02f8fc80 62800000 62a60159 62800000 00000003

Subject:RE: acid 4 crashes at startup

Reply by: pwppch

Date:9/5/2002 10:29:33 PM

Q: Do you have a prior version of ACID? If so, does it start up ok?

I would try disabling the Terratec card. ACID can run with no audio hardware available, and this would narrow it down to at least exclude the audio card as the culprit.

You may have to do the following to prevent the ASIO drivers from being loaded as well. (Disabling a audio card in Windows doesnot prevent the ASIO drivers from being enumerated and loaded, so this could cause a problem as well.) You may want to first try disabling the ASIO drivers

You can disable the ASIO drivers as follows:

- Start Menu | Run | regedit
- Locate the following key in your registry:
HKEY_LOCAL_MACHINE\SOFTWARE\ASIO

Located in here will be a list of installed ASIO drivers. Locate the entry for your Terratec card. You will find a key labled CLSID in here, it is of type REG_SZ. Rename this key to xCLSID.

This will bascially disable the ASIO driver for the Terratec card.

Start ACID.

If ACID launches successfully, then the problem was here and we will have to determine why the Terratec ASIO drivers would becausing us a problem.

If not, then we will have to look for other causes for the problem.

Peter