Subject:Nosie Reduciton

Posted by: chrsal

Date:2/18/2005 5:02:55 AM

I am new to SF and have a question. When I use the noise reduction plug-in it works great. I am taking out the sound of an 8mm camera in some film from the 70's. The problem is it messes with the voices and gives them some kind of echo/delay. What am I doing worng? is the just the way it is?

thanks,
Chris

Subject:RE: Nosie Reduciton

Reply by: mpd

Date:2/18/2005 5:25:01 AM

You have to play with the settings.

Personally, I start with the default for fast computers and modify from there. I usually set the mode to 3, and bump up the FFT length.

The key, though, to the NR2 plugin is getting a good noiseprint.

Subject:RE: Nosie Reduciton

Reply by: rraud

Date:2/18/2005 11:05:57 AM

In some cases, two NR process' with a lower noise reduction setting work better than one with a high setting.

As MPD said, Getting a good noise print is important

Subject:RE: Nosie Reduciton

Reply by: Rednroll

Date:2/22/2005 12:45:56 PM

Try adjusting the modes. I have found Mode 2 and Mode 3 the best for voice only type of material and as previously recommended getting a good noise print is a key factor. Click on the Help button and read through the entire thing. There's a lot there that can help you remove noise like a pro once you get the fundamentals down. It doesn't take more than 15 minutes to read the help.