Subject:acid pro and sonic foundry reverb/fx....

Posted by: lilpizan77

Date:10/6/1999 6:01:00 PM

i recorded a flute harmony from my keyboard into acid
pro ... using 2 seperate tracks i panned one full right and
one full left.. and they were both fully seperated...
then..i decided to add sonic foundry reverb to the track
panned full left , and i lost my full pan left.. the track
began " leaking " over to the right side... the funny part
is , the monitor for the effect showed a signal ONLY on the
left side , but yet , it was on both sides.. and the main
acid mixer was showing signals on the left and right
sides... when i lower the effect volume , my original pan
left returns..and everything works perfectly.. I NEED
HELP !!!

thanks...
- eddie -

Subject:Re: acid pro and sonic foundry reverb/fx....

Reply by: yirm

Date:10/7/1999 11:39:00 PM

I'm guessing that the effects are stereo effects, but the monitor
shows the input signal, not the output. If you decrease the amount
of effect in relation to the clean signal, you will get less stereo
bleed. The effect itself may have panning parameters, but I'm
guessing it doesn't, cuz you probably would have found them. But my
guess is that what you are experiencing is "as designed."

-Jeremy

edward natale wrote:
>>i recorded a flute harmony from my keyboard into acid
>>pro ... using 2 seperate tracks i panned one full right and
>>one full left.. and they were both fully seperated...
>>then..i decided to add sonic foundry reverb to the track
>>panned full left , and i lost my full pan left.. the track
>>began " leaking " over to the right side... the funny part
>>is , the monitor for the effect showed a signal ONLY on the
>>left side , but yet , it was on both sides.. and the main
>>acid mixer was showing signals on the left and right
>>sides... when i lower the effect volume , my original pan
>>left returns..and everything works perfectly.. I NEED
>>HELP !!!
>>
>>thanks...
>>- eddie -