Subject:Sterio problem

Posted by: dodododa

Date:7/28/2000 12:07:00 AM

Hello, I have Acid Music 2.0 and am haveing some problems
with sterio. When I pan right noise comes out of both
speakers, when I pan all the way left there is no sound.
The sound gets softer as it pans left until it reaches 100%
where the sound stops. I thought it was a problem with my
speakers but it plays other songs fine. I made a short song
panning from left to right and made it an mp3 to see if the
problem was just in the acid program but the mp3 had the
same problem. Would this be a glitch in the program?
Should I reinstall it?

Thanks in advance.

Ben.

Subject:Re: Sterio problem

Reply by: lnetzel

Date:8/1/2000 3:21:00 AM

Ben Bell wrote:
>>Hello, I have Acid Music 2.0 and am haveing some problems
>>with sterio. When I pan right noise comes out of both
>>speakers, when I pan all the way left there is no sound.
>>The sound gets softer as it pans left until it reaches 100%
>>where the sound stops. I thought it was a problem with my
>>speakers but it plays other songs fine. I made a short song
>>panning from left to right and made it an mp3 to see if the
>>problem was just in the acid program but the mp3 had the
>>same problem. Would this be a glitch in the program?
>>Should I reinstall it?
>>
>>Thanks in advance.
>>
>>Ben.

You should check the cables and see if they are Stereocabels or
Monocables. Or maybe you only have Mono Outputs?

I doubt very much that it's a problem with ACID software. If it's not
the cables then maybe you have setting in your Soundcard that should
be configured. What Soundcard do you use? Also check the Windows
Soundcontrol/Multimedia in the Controlpanel and make sure you have
everything set on Stereo.

/Lars