Acid Pro 3 Rendering Problems -ACID Product Family

Subject:Acid Pro 3 Rendering Problems Posted by: DjXSoundz Date:11/13/2001 2:56:18 PM When i use Acid Pro 3.0 and render to a wav or wma, i get buzzing. every three seconds or so it cuts out a second of the track and buzzes.... Thanx for all to help in advance. DjXSoundz (Direkt Truth on AP) Email DjXSoundz@hotmail.com ' PC Specs: Pentium III, 800mhz 384mb of RAM (128+256) Windows ME soundcard : SoundBlaster AudioPCI PC actually works kind of slow mayb thats it... THANX SO MUCH I GOT TO HURRY TO GET THA CD IN
Subject:RE: Acid Pro 3 Rendering Problems Reply by: Iacobus Date:11/13/2001 8:55:20 PM Did you see and try any of my recommendations here? HTH, Iacobus
Subject:RE: Acid Pro 3 Rendering Problems Reply by: Rockitglider Date:11/14/2001 3:36:14 AM Hello, Are you using any demo plug-ins? Do you have any external equip like Mixer and Mics? See ya, Rockit
Subject:RE: Acid Pro 3 Rendering Problems Reply by: DjXSoundz Date:11/14/2001 2:51:47 PM yep my mic and synths are plugged into a external mixer, i dont think i'm using any demo plug ins . it used to work fine thanx DjXSoundz
Subject:RE: Acid Pro 3 Rendering Problems Reply by: Rockitglider Date:11/14/2001 8:43:45 PM I would look for a possible problem with something connected to the mixer, or try routing through different busses or inputs in your sound card. I had a problem with having two Delta cards on my system, and my Behringer mixer connected to the inputs of the sound card, and another piece of equipment, (J-Station) going to SP/DIF input at the same time. With the control volume turned up on the mixer, I got hum in the recordings only, not in the output, and turning down the cotrol room volume or disconnecting that input solved the problem, I think it was some kind of backfeed. So I would experiment with things like that, for starters. By the way, I used to have a Sound Blaster Platinum card, and used to have humming problems with the live drive mic connection, so you might try there too. See ya, Rockit

Subject:Acid Pro 3 Rendering Problems

Posted by: DjXSoundz

Date:11/13/2001 2:56:18 PM

When i use Acid Pro 3.0 and render to a wav or wma, i get buzzing. every three seconds or so it cuts out a second of the track and buzzes.... Thanx for all to help in advance. DjXSoundz (Direkt Truth on AP)

Email DjXSoundz@hotmail.com '

PC Specs:
Pentium III, 800mhz
384mb of RAM (128+256)
Windows ME
soundcard : SoundBlaster AudioPCI
PC actually works kind of slow mayb thats it...

THANX SO MUCH I GOT TO HURRY TO GET THA CD IN

Subject:RE: Acid Pro 3 Rendering Problems

Reply by: Iacobus

Date:11/13/2001 8:55:20 PM

Did you see and try any of my recommendations here?

HTH,
Iacobus

Subject:RE: Acid Pro 3 Rendering Problems

Reply by: Rockitglider

Date:11/14/2001 3:36:14 AM

Hello,

Are you using any demo plug-ins? Do you have any external equip like Mixer and Mics?

See ya, Rockit

Subject:RE: Acid Pro 3 Rendering Problems

Reply by: DjXSoundz

Date:11/14/2001 2:51:47 PM

yep my mic and synths are plugged into a external mixer, i dont think i'm using any demo plug ins . it used to work fine thanx DjXSoundz

Subject:RE: Acid Pro 3 Rendering Problems

Reply by: Rockitglider

Date:11/14/2001 8:43:45 PM

I would look for a possible problem with something connected to the mixer, or try routing through different busses or inputs in your sound card.
I had a problem with having two Delta cards on my system, and my Behringer mixer connected to the inputs of the sound card, and another piece of equipment, (J-Station) going to SP/DIF input at the same time. With the control volume turned up on the mixer, I got hum in the recordings only, not in the output, and turning down the cotrol room volume or disconnecting that input solved the problem, I think it was some kind of backfeed. So I would experiment with things like that, for starters. By the way, I used to have a Sound Blaster Platinum card, and used to have humming problems with the live drive mic connection, so you might try there too.

See ya, Rockit